How To Hang Tv On Plaster Wall

A flashy new TV is like a prized trophy that you can't wait to show off to everyone else. And then, naturally, the urge to fix a brand-new TV every bit soon as you lot get it out of the box is too much to resist!

Want to invite all your friends and showtime enjoying the game dark on the big screen right abroad?

You need to bargain with a few things first!

1 of the most important matters regarding hanging up a new Television is choosing how to fit it on your wall properly. Each wall type comes with its ain set of challenges.

Especially, if you are dealing with an former house that has a plaster wall, then the beams become very hard to locate. Every bit a issue, the integrity of the wall structure becomes compromised and y'all could end upward causing permanent harm to your wall if you aren't conscientious.

Does that mean you need to hire a pro to avoid such mishaps?

Well, you tin do that.

Or you can larn how to hang a Television set on plaster walls from this article and do it yourself!

Tools Required To Hang The Television

Before you lot start fastening a TV mount to the wall, at that place are a few things you need to gather to enjoy the view without risking impairment to your wall.

1. Stud Finder

A stud finder is a handheld device that helps find the framing studs behind the wall. At that place are 2 types of stud finders bachelor on the marketplace correct now: Magnetic stud finder and Electric stud finder.

two. TV Mount

Near TV comes with a Television receiver mountain included in its parcel. The wall mounts are designed in a way to fit the profile of a specific size and weight.

If y'all need to purchase the mount separately, make sure it's compatible with your particular model. For example, if your Goggle box size is 50-inch and you try to install it in a 32-inch mount, don't exist surprised when the whole setup comes crashing downwards on the floor in seconds!

3. Plaster Anchor

Sometimes walls don't have any studs behind them. In that example, it becomes difficult to observe a perfect spot to hang your Television receiver.

That's when plaster anchor and anchoring screws come up into play!

For plaster walls, you demand to choose anchors that are specifically designed for that. Typically speaking, the ballast should be heavy-duty and then that it can bear at least 150 pounds of weight.

4. Drill Machine

A power drill machine is essential for this project in gild to brand circular holes and drive fasteners into the forest studs.

You volition also need drill bits for this purpose. Yet, make certain the $.25 are at least one/eight-inch smaller than the plaster anchor you are using for mounting the TV.

5. Screwdriver

A screwdriver is basically a paw-held tool to turn the screws with its slotted head. To mount the anchor properly, you demand a screwdriver for this project.

There are different types of screwdrivers available on the market including slotted, Philips, Torx, Hex, Robertson etc. For this chore, nosotros recommend using the Phillips screwdriver to get the desired result.

6. Bolts

Most of the TV mounting plates come with some bolts to hook them upward. The bolts help tighten the mounting gear and make the whole structure a lot stronger. Usually, M8 bolts are best suited for this purpose.

Things To Consider When Mounting Television set

Mounting TV

Got all the things yous need in one place?

Cool!

Before we beginning hanging the TV on the wall, let's become over some factors that you demand to consider-

Do You Desire The Mount To Be Flexible?

Depending on whether you want the mountain to be flexible or not, at that place are different types of mounts bachelor out there.

Suppose, yous desire to come across the Goggle box while sitting on the burrow besides as don't want to miss your favorite show while eating in the dining room either.
But your TV can't be placed at 2 places at once.

Or can it?

Evidently, if you install a tilting TV mountain, it will exist like having a Boob tube in ii places at the same fourth dimension!

You can fifty-fifty have a TV that comes downwards as much as xx-inch away from its original identify using the tilting machinery. However, if your TV is already positioned in a perfect height that doesn't demand to exist altered, then a fixed wall mount is a more suitable option for you.

What To Do When The Stud Finders Don't Work?

Electric stud finders are sometimes a bit tricky. They might requite yous simulated warnings if you don't know how to use them properly.

To be effective, information technology's best to go slowly over the wall with the stud finder and let the device read the density of the material along the way.

Start from a detail spot and so motility back and forth over the surface a few times. And then, mark each stud spot with a pencil or painter's record and move onto the next ane subsequently that.

Are The Cords Showing?

You want the brand-new TV to look fancy, right?

Then, if a agglomeration of tangled cord is exposed in front of the TV, it'south going to be a huge eyesore!

To make sure the cables stay subconscious, we suggest using an In-wall power extension or a power relocation kit to hibernate all the signal wires of the Television receiver.

How To Mount A Television set On A Plaster Wall?

How To Mount A TV On A Plaster Wall

Footstep one: Decide Where Y'all Want To Position The TV

You should position the TV at center level. The larger the Telly is, the higher it should be positioned to offering a expert viewing angle.
Brand sure the spot has a power outlet nearby.

Step 2: Locate The Wall Studs

Utilise a stud finder to locate the studs past belongings the finder flat on the wall and activating the device.
Once the finder beeps, mark the location of that stud and try finding the side by side one. To remember the location properly, yous can use a painter'due south tape for that purpose.

Step iii: Level The Mount

Now it'southward time to level the mount. To make your task easier, we recommend using a carpenter's level (A tool that's used to indicate if the surface is parallel/perpendicular to earth).
Make sure the bottom and top edges of the mount are parallel with the floor.

Stride four: Marker The Required Holes

Hold the mount pressed against the wall and await for holes. Go on in mind, virtually mounts come with 4/5 holes and you need to ensure all the screw holes line up with the nearest studs.
Marking the spiral holes with a pencil.

Step v: Select A Plaster Anchor

Cull a plaster anchor that can bear at least 150 pounds of weight for average TV size.
If y'all recall your Goggle box size is more than the average ones, the anchor capacity should be the combined weight of the TV, mount and an extra xx% on top of the total event for safety.

Step vi: Drill Your Pilot Holes Into The Wall

Use a masonry drill scrap to drill pilot holes through the wall. The size of the drill bit should be at least 0.32-centimeter smaller than the wall anchor.
Install a power drill with the drill bit.
Drill through the previously-made markings and make sure the drilled holes are large enough to adjust the wall anchors you are using.

Step 7: Screw The Anchors In

Depending on what type of anchors you are using in your project, you lot may demand to use an electric screwdriver to screw the anchor into the wall.

Step 8: Remove The Screws From The Anchor

If you are using toggle bolts, skip this step and move onto the adjacent 1.
Insert the screwdriver into the screw heads and rotate them counterclockwise.
Once the screws come up out of the wall, the anchors stay in identify.

Step ix: Attach The Mounting Plate To The Wall

Take the anchor screws and slide it through the mounting plate and into the wall.
Fasten the screws then that they remain flush against the wall properly.
Check if the plate is installed properly.

Stride x: Attach The Mounting Plate To The TV

Lay the Telly on a flat surface in a fashion so that it doesn't get damaged.
Throw away whatever plastic embrace that's on the back of your Idiot box and spiral it to the mounting subclass by turning them in a clockwise direction.
Ask your roommate/friend to elevator up the TV and line up the plate with the mounting bracket.

Step eleven: Mount Your TV To The Wall

Identify the TV on the wall subclass and check to come across if it's placed on the center position.
Try nudging the device from side to side to run into if the whole thing is installed properly. If stable, then your work here is washed! If not, become through each stride more carefully and read the Boob tube's manual to learn more than about information technology.

How To Mount A Television receiver On A Plaster Wall Without Studs?

If you want to hang your Boob tube without whatever studs, then yous need to employ heavy-duty toggle anchor or molly bolts so that yous don't harm the wall in the process.

Toggle Anchors

Agree the mount to the plaster wall.
Prepare the valves at the end of each bolt and slide them through the mounting plate and straight into the wall.

Molly Bolts

If the molly bolts take abrupt tips, and then install them by tapping them hard with a hammer.
For non-pointed molly bolts, you need to cutting an installation hole beforehand.

Tips For Mounting Your TV In The Easiest Mode

Before mounting your Television, make sure the mount style is compatible with your TV'southward model number. You tin besides get a universal model if you want.
It's possible to accidentally drill into the incorrect spot. If that happens, encompass the hole with a plaster patch.
Earlier mounting the Television receiver, connect all the electric cords properly and make sure you lot find some ways to hide the exposed wires to get the desired appearance.
Purchase longer cable than you recollect you are going to demand. If there's some extra cablevision, you can ever stuff it up and hibernate it abroad in the wall.
Check to see if your TV is properly positioned before drilling out the holes in the wall.
Read the TV manual earlier installing and enquire for help from a professional if needed.

Wrapping It Upward

Improper hanging results in damaging your make-new Television, or worse, the wall permanently.

However, if the mounting subclass is anchored with the wall properly, you should be able to hang anything in the walls, exist it with or without studs.

Hopefully, our article has taught you how to hang a TV on plaster walls and helped you enjoy your favorite programs without any risk of impairment to your wall or TV.

Remember: y'all aren't a pro and naturally, it will take you lot more than twenty minutes to complete the whole task. So, budget your time accordingly, take some patience and y'all will exist able to mount your TV from unboxing to the very terminate all on your own!

Related Commodity:
>> Cull right coaxial cable for tv
>> Top v picks of marine tv set antenna
>> Top 10 Television receiver antenna rotator reviews
>> Select perfect television antenna for metal roof
>> A Buying guide of outdoor television antenna preamplifier
>> Our reviews of height quality omnidirectional television receiver antenna
>> Vocalism Amplifier for Teachers Buying Guide

Source: https://purdylounge.com/how-to-hang-a-tv-on-plaster-walls/